Boitier 6 modules IP65 avec vitre polycarbonate, sans access REF : CDN6PT

This timer integrates the LivePool technology for a smart and connected pool. The LivePool equipments optimise their operation by communicating with each other via the local, private and secure wireless network (Wifi) of the consumer.

FEATURES :

• Switch Connect is a modular connected clock controlling filtration, lighting and a booster or an auxiliary pump (boosting for instance).
• Fitted in standard control boxes (on a DIN rail provided there is sufficient room).
• Automatic pairing of the swimming pool’s other LivePool devices.
• No electrical coupling required between the LivePool devices.
• Local or remote connectivity.
• Secure access to the application.
• Dimensions: width 7.2 cm (4 modules), height 9 cm, depth 6.5 cm.

FILTRATION :

• Filter pump contactor winding controlled by dry contact.
• 3 filtration modes: manual, timer and automatic according to water temperature.
• Water and air temperature display (sensors required).
• Digital temperature sensors with stainless steel head and 5-metre cable.
• Pipe saddle for water sensor not supplied. Wall mounting system for air sensor supplied.
• Integrated frost protection function (sensor supplied).
• Maintenance mode activated directly on the box to manually control filtration and inhibit the application (to backwash the filter or for use without the mobile app).
• Diode on the front panel of the box indicating the pump’s operating state.

LIGHTNING :

• Control of the primary of the lighting transformer by dry contact.
• Management of white and RGB LED bulbs.
• Manual or programmable mode according to 3 time ranges.
• Auto power off mode configurable from the LivePool application.
• Sequential colour changes configurable in the LivePool application for RGB leds.
• Diode on the front panel of the box indicating the lighting’s operating state.

BOOSTER OR AUXILIARY PUMP :

• Control of the contactor coil of the booster or auxiliary pump by dry contact.
• 2 operating modes: manual and clock.
• 3 operating ranges in clock mode.
• Option to have the output slaved to the filtration pump (for use with a booster) or not (for use with an auxiliary pump for instance).
• Diode on the front panel of the box indicating the booster’s or auxiliary pump’s operating state.

Already have a LivePool account? Scan the QR code affixed to the product for easy pairing!