Customer department : 09 70 72 5000
Our Catalog
Customer department : 09 70 72 5000

Automatic in-ground Ultima cover

No image
  • CF-Group-product.png
  • norm-nf-p-90-308-safety.png
  • 2-years-warranty.png
DEL
  • Type of pool : above-ground
  • Max. pool length in m : 14.00
  • Max. pool width in m : 6.00
Need advice?
09 70 72 5000
From monday to friday 08:00 am- 6:00 pm See the peak times

Product Bonuses

  • Very fast winding and unwinding (< 1 min) for a 4.00 x 8.00 m pool.
  • Optimum safety while preserving the aesthetic appearance of the pool.
  • Keeps the pool perfectly clean all year round.

TYPE OF POOL

  • For swimming pools under construction or renovation.
  • Maximum dimensions of the cover of 6.00 m (distance between rails) x 14.00 m (total length of rails).
  • Safety cover suitable for swimming pools with symmetrical shapes.

POSSIBLE CONFIGURATIONS

  • The canvas slides in the 2 rails fixed on the lengths.
  • 4 rail versions available:
    • Flat rails under coping (A).
    • Rails savings hung under coping (B).
    • Screw rails on deck (C).
    • Recessed rails on deck (D).
  • For type A/B rails: rectangular shape without appendix.
  • For C/D type rails: rectangular or symmetrical shape.

FOR THE USER

  • Does not require a rigging kit (simple operation).
  • The water in the pond stays perfectly clean. No algae development thanks to the opacity of the canvas.
  • Chemical consumption is reduced.
  • Promotes water saving because no evaporation.
Image Technical specifications

Technical specifications

1-HYDRAULIC MOTORIZATION

  • Powerful and reliable hydraulic motor.
  • 2 hydraulic motors (opening/closing). The conjunction of the 2 motors limits the permanent mechanical tension in the system (ropes, pulleys, etc.)
  • No electricity at the edge of the pool.

Hydraulic unit

  • 1100 watts.
  • Automatic clutch release at the stop by adjusting the overpressure.

Electrical control box

  • 230 Vac power supply, integrated electrical protection.
  • Resettable circuit breakers.
  • TBTS key box for outdoor installation.
  • Equipped with a 24 Vdc output for supplying the salt stop.

      2-ALUMINUM HEADBAR

        3-MAST ANODIZED ALUMINUM 20 MICRONS THROAT

          4-TELESCOPING BRACKETS FOR TRUNK CLADDING (INCLUDED)

          • 20 micron aluminum.
          • Max. : from 40.00 cm to 55.00 cm.
          • High rigidity.
          • Wall fixing at the back of the box.

          5-ALUMINUM STOP CORNERS

        • for rails under coping only.
          • 6-TOILE

            • 580 g/m² reinforced PVC fabric with anti-UV treatment (compliant colours).
            • Assembly by high frequency welding.
            • PVC-coated polyester drainage grid located across the width to allow residual rainwater to drain into the pool at the end of the roll-up.
            • Anti-abrasion reinforcement under the canvas to protect the cover from premature wear by friction on the deck (standard reinforcements for friction surfaces < 40 cm for versions with deck rails).
              • 7-AUTOMATIC DRAINAGE PUMP (SELV 12 VAC)

                Permits continuous drainage of rainwater.

Options

ANTI-ABRASION REINFORCEMENTS

The addition of anti-abrasion strip should be provided if the distance between the rail and the edge of the pool is greater than 40 cm. The anti-abrasion reinforcements help protect the fabric in areas of friction. They also make it easier to slide the canvas.

ADDITIONAL METER OF HOSE

In cases where the distance between the engine and the hydraulic unit is more than 15 m from the engine (maximum 30 meters).

STANDARD OR CUSTOM-MADE DECKING

STOP SALT MANAGEMENT

The "stop salt" box allows the information "cover unrolled" or "cover rolled up" to be automatically transmitted to the salt chlorinator. Strongly recommended in case of salt treatment.

Colour

NF P 90-308 COMPLIANT COLORS

Almond

Almond

Beige

Beige

Blue

Blue

Dark grey

Dark grey

Grey

Grey

Tips

Do not hesitate to ask us for the complete Ultima Cover site preparation file.